wholesale oem luxury vinyl tile flooring factory,supplier and manufacturer

Luxury vinyl tiles flooring are a kind of flooring material, usually cheap, easy to install, and easy to maintain. These floor tiles are mainly made of polyvinyl chloride resin and plasticizer, which are waterproof and very durable. Floors covered with vinyl tiles, if properly maintained, can be used for a long time without looking old or worn. As a wholesale oem luxury vinyl tile flooring factory, supplier and manufacturer, we will introduce luxury vinyl tile flooring.

Why use luxury vinyl tile flooring?

There are many styles of vinyl tiles on the market. In addition to basic colors and patterns, vinyl floor tiles are now being innovated to imitate other types of more expensive floors, such as wood slats, marble, and inlaid wood. These tiles are made of various textures to match the floor style they imitate. Some vinyl floors are well done to disguise their expensive counterparts. Sometimes it is difficult to tell that the floor is made of vinyl tiles, rather than marble or wood. Most vinyl floor tiles have a self-adhesive backing, making it easy for most homeowners to install.

To install veneer tiles, just peel off the backing and press the tiles on the floor. Some vinyl floor tiles do not have an adhesive backing and need to be fixed to the floor with an adhesive. In order to properly maintain the vinyl tile floor, it should be cleaned frequently. Walking on rough or dirty vinyl floors may cause scratches. The floor should be wiped with water or a special vinyl cleaning product once a month. In order to maintain the high gloss or satin finish of vinyl tiles, a special clear coating can be used. Cleaners, abrasives and wax should not be used on vinyl tiles. Vinyl tile flooring has some caveats. Because vinyl is cut into tiles, vinyl tile floors have many edges. Over time, vinyl tiles sometimes loosen. In addition, when the vinyl floor is towed away, the dirt will be trapped in the cracks between the tiles. Many homeowners and businesses who choose vinyl floor install it in heavy traffic areas because of its durability. The tile itself is completely waterproof, so it is often used in the kitchen. However, as the appearance and quality of vinyl tiles have been improved over the years, it has gone out of the kitchen and entered other rooms.

How to spread vinyl tiles on the wall?

The first step in covering a wall with vinyl tiles is to clean as thoroughly as possible. This is the most important part of the whole process. If there is any type of dirt, debris, or residue from other wall coverings, the adhesive will not stick well, and there will be small lumps throughout the vinyl tile. Wash the wall with warm water and mild detergent. Wipe the wall with a sponge, and then dry it with a clean cloth or towel.

Once any type of dirt and debris on the walls are cleaned up, you can start laying vinyl tiles for your bathroom walls. To do this, you need to find the center point of the wall. Measure the height and width of the wall to find this location. Draw a chalk line in both the vertical and horizontal directions. By doing this, you can ensure that you use a more complete vinyl tile piece.

Vinyl tiles are easy to stick to the wall. Most vinyl tiles have peeling and sticky bottoms, but some adhesives are still needed. Start from the center of the wall. This is where you will stick four vinyl tiles along each axis point. Spread a thin layer of adhesive with a slotted trowel, peel off the back of the vinyl, and fix it in place. Do this for all four parts. After the first part is in place, use a spirit level to make sure that they are straight along the horizontal and vertical points. Continue to set the tiles in the same way until you reach the area of the wall that needs trimming.

Once you reach the wall, you need to do a little trimming of the vinyl tiles to make them fit. Put a tile on the wall and mark where it needs to be cut. You can also measure the opening and move it to the tile. Cut with a multi-purpose knife and stick the tiles on the wall. Put a rubber roller on the tiles to make sure they are all in contact with the adhesive.